Horsch Titan 34 UW

The HORSCH auger wagon Titan 34 UW stands for harvest efficiency in a new dimension. It has inherited the genes of the first HORSCH auger wagon and raises them to a completely new technical level. Due to the large hopper capacity of 34 m³, idle times on the field boundaries and awkward manoeuvring are part of the past. The hopper capacity of the UW corresponds to one truckload. A truck is thus filled at one go. The output of the newly designed hydraulically foldable auger conveyor (Ø 600 mm) is 18 tons per minute - corresponding to gigantic 1 000 tons per hour! Thus, 34 m³ are reloaded in only 90 seconds. When driving on the field, the auger can be folded in and rests safely in a support. In driving position, the folded auger does not overlap at any side. The width when driving on the road is below 3 m during. The Titan 34 UW (wheel version) has a telescopic axle as standard equipment. It moves every tyre to the outside by 30 cm. This increases the width of the machine from 3 m to 3.56 m. Thus, stability is increased and soil pressure reduced as the tyres of the auger wagon do not run in the tractor tracks. Another soil-protecting means are the large tyres (900/60 R 32). To guarantee a maximum contact area, power tracks are available as an option. Moreover, there are an integrated weigh system, a pneumatic brake system and a clearly visible display of the opening situation of the auger conveyor slide. From the drawbar platform, a ladder leads onto resp. into the wagon. Inside the wagon, there are steps on the auger to climb inside for cleaning or maintenance works.