RB iconIP iconMPE iconRBAS iconRouse icon
Mascus LogoΌλες οι κατηγορίες
Καταχωρήστε αγγελία!

Sollroc Low Air Pressure DTH bit CIR90 CIR110 CIR150

Τιμή χωρίς ΦΠΑ

Compnay LOGO
Images3
Sollroc Low Air Pressure DTH bit CIR90 CIR110 CIR150 Τρυπάνια
Sollroc Low Air Pressure DTH bit CIR90 CIR110 CIR150 Τρυπάνια
Sollroc Low Air Pressure DTH bit CIR90 CIR110 CIR150 Τρυπάνια
FavoriteΑγαπημένο
shareΜοίρασέ το
Save searchΑποθήκευση αναζήτησης
Εκτύπωση

ΠΛΗΡΟΦΟΡΊΕΣ

Κατηγορία
Τρυπάνια
Μάρκα
Sollroc Low Air Pressure DTH bit CIR90 CIR110 CIR150
Έτος κατασκευής
2022
Κατάσταση
Καινούργιο/Αχρησιμοποίητο
propertynames.pp_location_h
Changsha
Χώρα
Κίνα
Mascus ID
B2EF60FC

ΤΙΜΟΛΌΓΗΣΗ

Επιλογή νομίσματος:

ΛΕΠΤΟΜΈΡΕΙΕΣ

Χώρα Παραγωγής
Κίνα
Όροι αποστολής
FOB, CFR, CIF, EXW
Άλλες πληροφορίες
Product description 1:Out of the trouble of foot valve fracture and expansion and contraction 2:Lower energy consumption and higher impact frequency,the drilling speed is 15%-30% higher than conventional DTH hammers: 3:Simple structure,reliable parts,long life,easy and low cost maintenance 4:Low air and oil consumption,the oil consumption is about 10% lower than the conventional DTH hammers. Product Application DTH hammers and bits are widely used in underground mining, quarries, hydraulic and Hydro-Power Engineering, water well drilling, Mineral exploration, anchoring hole drilling, geothermal engineering, Subway excavation, another civil engineering.it has the advantage of high flatness, smooth hole wall,high rigid of drill rod and hammer,independent of high axial thrust, no limit of drilling depth, low cost of devices and easiness to maintain. Product Advantages 1. Appearance: Since the heating process has a complete and stable process, the appearance of the product can be kept consistent, and the appearance will not be angular and will not hurt the hand. 2. Product intrinsic: The service life has completely exceeded atlas and sandvic. 3. QC:4 times inspection and 1 test. 4. First inspection: quality management will conduct all inspections at the beginning of product production. 5. Sampling inspection: the product will be sampled during processing. 6. Quality inspection: Full inspection is performed every time the next process is delivered. 7. Final inspection: the product is sent to the inspection room for final inspection.Δείτε περισσότερα

Changsha SOLLROC Engineering Equipments Co., Ltd

No.55 Jiucaiyuan, Wenyi road, Furong District 410001 Changsha Hunan 湖南 Κίνα
8
Έτη στη Mascus
Λάβετε ειδοποίηση μέσω email
Δείξε όλες τις αγγελίες Changsha SOLLROC Engineering Equipments Co., Ltd
report adΑναφορά ύποπτης αγγελίας